TORK CRAFT Masonry Drill Bit 16 X 400mm

Drill bit for Masonry Drill diameter: Ø16.0mm Length: 400mm Drill bit: TCT (Tungsten carbide tipped) Application: The drill bit is used to drill holes in masonry, thanks to the uniquely designed TCT (tungsten carbide tipped) point. A percussion (hammer action) drill with a 3 jaw chuck is required. Preset the depth gauge on the drill to achieve the correct depth before drilling into walls. TIP: Have a wall scanner (detector) ready before drilling into walls. CAUTION: Do not use the drill bit with a rotary hammer. The impact energy will break the conversion chuck.

Product code: DR83160